Knife Mercharness
The Mercharness from Mercop is an alternative way of carrying small or large fixed blades concealed on one’s person. It’ll work with any sheath that has eyelets. It consists of a length of OD, black or khaki 550 cord and five short lengths of rubber tubing. The inner diameter of the tubing is tight enough to enable to tubing to be used for securing the ends of the 550 cord without slipping, yet allow andjustments.
One of the tubes creates the X in the middle of the back, while the other four secure the loose ends. The loose ends are threaded through eyelets in your knife sheath, then back through the tubes. A small wire loop is supplied to aid in getting the end of the cord through the tubing. The wire loop is first inserted through a tube, then used to pull the end of the 550 cord through. Assembly took only a couple of minutes. The harness is adjusted by sliding the tubes back and forth, changing the length of the loose ends. The knife can be positioned high up under the armpit, or lower down. It can also be positioned slightly forward or to the rear depending on how you adjust the harness.